The SMC ITV2030-012BL is an electro-pneumatic regulator designed for applications that require precise and repeatable air pressure control from an electrical input signal. As part of the ITV1000/2000/3000 series, this model is used in automated production lines, pneumatic handling systems, test fixtures, packaging equipment, and other industrial environments where stable pressure regulation directly affects product quality and machine consistency. It belongs to the 2000 type range and is configured for a 0.5 MPa pressure range, 24 VDC power supply, 4 to 20 mA DC sink-type input, 1 to 5 VDC analog monitor output, Rc 1/4 port thread, flat bracket, and a right-angle 3 m cable connection.
One of the main reasons this regulator is widely used is that it converts an electrical control signal into a proportional pneumatic output without the step changes associated with traditional manual regulators. That allows the machine designer to control pressure remotely, integrate the regulator into PLC or controller logic, and adjust output pressure dynamically during operation. SMC describes the ITV series as offering stepless control of air pressure in proportion to an electric signal, with high sensitivity, linearity within ±1% F.S., and hysteresis within 0.5% F.S. for the series. These characteristics make the ITV platform suitable for processes that depend on fine air control rather than simple on/off pneumatic switching.
Product Overview Table
| Item | Description |
|---|---|
| Brand | SMC |
| Model | ITV2030-012BL |
| Product Type | Electro-pneumatic regulator |
| Series | ITV1000/2000/3000 |
| Type | 2000 type |
| Pressure Range | 0.5 MPa |
| Power Supply | 24 VDC |
| Input Signal | 4 to 20 mA DC, sink type |
| Monitor Output | 1 to 5 VDC analog output |
| Port Thread | Rc |
| Port Size | 1/4 |
| Bracket | Flat bracket |
| Cable Connector | Right-angle type, 3 m |
| Pressure Display Unit | MPa |
| Product Net Weight | 0.61 kg |
| Typical Use | Remote pressure control in pneumatic automation systems |
The product weight is commonly listed at approximately 0.60 kg, while a closely related ITV2030 configuration is listed at 0.610 kg in an SMC Europe datasheet. For commercial listing and general product-content purposes, stating the weight as about 0.6 kg is the most defensible wording unless a factory-issued part-specific datasheet is provided for this exact suffix combination.
Key Features Table
| Feature | Practical Value |
|---|---|
| Electronic proportional control | Allows pressure to be adjusted automatically by controller signal |
| Stepless pressure regulation | Helps improve process smoothness and precision |
| Clear digital display | Makes monitoring and setup easier on the machine |
| Analog monitor output | Supports system feedback and external monitoring |
| Compact integrated design | Reduces the need for separate manual regulating hardware |
| Series-level high sensitivity | Suitable for accurate pneumatic control tasks |
| Stable response characteristics | Supports repeatable machine performance |
| Industrial mounting format | Easier integration into control panels and equipment frames |
From an engineering perspective, the ITV2030-012BL is useful because it reduces the gap between electrical control architecture and pneumatic execution. In many machines, the control system already manages speed, timing, interlocks, and sensing. By adding an electro-pneumatic regulator like this model, pressure becomes another programmable variable. Instead of sending a technician to manually adjust a knob, the machine can change pressure automatically for different product recipes, different clamping forces, or different stages of the process. That improves repeatability and also reduces changeover time.
This is especially valuable in applications such as force control, press fitting assistance, air blow optimization, film tension handling, sealing pressure adjustment, and testing stations. For example, on a packaging line, the required pneumatic pressure may differ between one package size and another. With the ITV2030-012BL, the PLC can issue the required 4 to 20 mA command signal and the regulator can adjust the output pressure accordingly. In fixture systems, this can help maintain a stable clamping condition. In air-knife or blow-off systems, it can help avoid excessive air consumption by using only the pressure level actually needed.
Another strong point of the ITV family is installation convenience. The unit combines regulator functionality with electronic control and visual display in one body, simplifying panel and machine layout. Distributor configuration information for the ITV2030-012BL shows it as a 24 VDC model with analog output, Rc thread, and flat bracket, which aligns with standard industrial control practice and makes it straightforward to incorporate into existing automation hardware.
Typical Application Areas
| Industry / System | How ITV2030-012BL Is Used |
|---|---|
| Packaging machinery | Controls sealing, pressing, or blowing pressure |
| Assembly automation | Adjusts pneumatic force for parts handling |
| Test equipment | Regulates pressure for leak, flow, or functional testing |
| Semiconductor and electronics equipment | Supports controlled low-force pneumatic operations |
| General factory automation | Enables remote pressure control through PLC systems |
| Robotic end-of-line tooling | Fine-tunes gripping or assist air pressure |
For search visibility and technical content quality, this model should be described with direct and relevant terminology such as SMC ITV2030-012BL electro-pneumatic regulator, proportional air pressure regulator, 24 VDC pneumatic pressure controller, and 4-20 mA pressure regulator. These terms reflect the product’s actual function and improve alignment with the language buyers, engineers, and procurement teams typically use when searching online. At the same time, the description should avoid exaggerated claims and remain anchored in application value, technical configuration, and operational benefit.
Why Buyers Choose This Model
| Buying Factor | Reason |
|---|---|
| Precision | Supports proportional pressure control rather than manual-only setting |
| Integration | Works well with PLC and analog control systems |
| Efficiency | Helps reduce manual intervention and changeover time |
| Monitoring | Analog output supports system supervision |
| Reliability | Built on a widely recognized SMC ITV platform |
| Versatility | Suitable for many pneumatic control scenarios |
In commercial terms, the ITV2030-012BL is a practical choice for OEMs, maintenance teams, machine rebuilders, and spare-parts buyers who need a regulator that can do more than hold a fixed pressure. It is suited to machines where pressure must respond to recipe changes, process feedback, or centrally managed control logic. Because it is part of a widely used SMC series, it is also relevant for replacement demand in installed equipment where users want to maintain original control behavior without redesigning the pneumatic section.
Summary
The SMC ITV2030-012BL is a compact and effective electro-pneumatic regulator for precise air pressure control in industrial automation. Its configuration includes 24 VDC power, 4 to 20 mA sink-type input, 1 to 5 VDC monitor output, Rc 1/4 connection, and a 0.5 MPa pressure range, making it a solid option for systems that need programmable and repeatable pneumatic performance. Its listed weight is about 0.6 kg, which is appropriate for standard machine integration and replacement sourcing. Overall, this model is well suited for users who need accurate electronic pressure regulation, easier system integration, and more stable pneumatic process control.
