The FESTO 536269 ADN-32-10-A-P-A is a compact pneumatic cylinder designed for precise linear motion in machines where space efficiency, repeatable actuation, and straightforward installation are all important. It belongs to the ADN series of compact cylinders and is built in accordance with ISO 21287, which makes it suitable for standardized industrial automation designs. This model uses a 32 mm piston diameter, a 10 mm stroke, and a double-acting operating principle, giving it a balanced profile for short-stroke pushing and pulling duties in production equipment, transfer units, clamping modules, and light assembly machinery.
Unlike longer-stroke cylinders intended mainly for transport motion, the ADN-32-10-A-P-A is optimized for compact machine sections where controlled motion over a short distance is required. The cylinder uses elastic cushioning rings or plates at both ends, supports position detection via proximity switch, and features a male-thread piston rod end, which simplifies integration with clevises, brackets, and custom motion interfaces. These details make it a practical actuator for machine builders who need reliable performance without using unnecessary installation depth.
A key commercial advantage of this model is that it combines a relatively small body with meaningful force output. According to the official FESTO datasheet, the theoretical force at 0.6 MPa (6 bar) is 483 N on the advance stroke and 415 N on the return stroke. The official product sheet also lists a product weight of 295 g, which is useful for equipment builders who need to control total moving mass or shipping documentation.
Key Technical Specifications
The specification summary below is based on FESTO’s official product page, the dedicated product datasheet for part number 536269, and the current ADN series catalog documentation.
| Item | Specification |
|---|---|
| Brand | FESTO |
| Part Number | 536269 |
| Model | ADN-32-10-A-P-A |
| Product Type | Compact cylinder |
| Standard | ISO 21287 |
| Mode of Operation | Double-acting |
| Stroke | 10 mm |
| Piston Diameter | 32 mm |
| Piston Rod End | Male thread |
| Piston Rod Thread | M10x1.25 |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Position Detection | Via proximity switch |
| Mounting Position | Optional |
| Operating Pressure | 0.06 MPa to 1 MPa |
| Pressure Range | 0.6 bar to 10 bar |
| Pneumatic Connection | G1/8 |
| Ambient Temperature | -20 °C to 80 °C |
| Corrosion Resistance Class | CRC 2 |
| Cleanroom Suitability | Class 5 according to ISO 14644-1 |
| Advance Force at 6 bar | 483 N |
| Return Force at 6 bar | 415 N |
| Product Net Weight | 295 g |
| Moving Mass | 85 g |
| Material Cover | Anodised wrought aluminium alloy |
| Seal Material | TPE-U (PUR) |
| Compliance | RoHS-compliant |
The 294 g weight above is not an estimate; it is shown directly in FESTO’s official product datasheet for this exact part number.
Design Characteristics and Mechanical Value
The ADN series is known for delivering compact geometry without giving up industrial usability, and the ADN-32-10-A-P-A is a clear example of that design philosophy. Its short body allows it to fit into equipment layouts where traditional profile cylinders or tie-rod cylinders would consume too much space. In practical machine design, this matters in indexing units, stop mechanisms, pick-and-place nests, compact pressing devices, and gate or shutter movements where every millimeter of installation depth affects the final machine footprint.
This model is also well suited to designers who need a standardized cylinder that is easy to integrate into repeat equipment platforms. Since it conforms to ISO 21287, it can support modular equipment development and reduce redesign work when machine builders adapt a successful mechanism to new projects. The use of a male-thread piston rod and M10x1.25 piston rod thread further supports common industrial linkages and mechanical connectors.
From a durability perspective, FESTO specifies a CRC 2 corrosion resistance class, which corresponds to moderate corrosion stress. That does not make this cylinder a heavy chemical-duty product, but it does indicate that it is intended for ordinary industrial environments rather than only controlled lab conditions. In addition, the cylinder is listed as RoHS-compliant and suitable for cleanroom class 5 according to ISO 14644-1, which broadens its relevance for electronics assembly, precision handling, and cleaner manufacturing environments.
Performance in Automation Systems
From an engineering standpoint, the ADN-32-10-A-P-A is most attractive where short, repeatable motion is needed with stable force and low installation burden. A 10 mm stroke is usually selected not for transport travel, but for functional motion: pressing, ejecting, separating, clamping, triggering a mechanism, or shifting a small mechanical element between two defined positions. Because this model is double-acting, both extension and retraction are pneumatically driven, which typically provides better control consistency than a single-acting spring-return design in repetitive automation cycles.
The theoretical force figures also make the model commercially useful in many light-to-medium machine tasks. At 6 bar, the cylinder provides 483 N advancing force and 415 N return force, which is enough for many positioning, holding, pushing, and transfer-related functions in automated equipment. Of course, theoretical force is not the same as guaranteed application force under all conditions; real output depends on friction, alignment, air quality, operating speed, mounting rigidity, and the attached tooling. Still, these values give buyers and machine designers a clear reference point when comparing this cylinder with other 32 mm compact models.
Another useful feature is support for position detection via proximity switch. In automated systems, feedback is no longer optional in many applications. A cylinder that can be monitored by proximity sensing is easier to integrate into PLC-controlled sequences, fault logic, interlocks, and cycle confirmation routines. That matters for OEM equipment, packaging lines, assembly cells, and semi-automatic fixtures where motion confirmation improves reliability and reduces troubleshooting time.
Materials and Construction
The construction materials of the ADN-32-10-A-P-A reflect typical FESTO industrial standards. The official datasheet lists an anodised wrought aluminium alloy cover and TPE-U (PUR) seals, while the ADN series catalog identifies the cylinder barrel as anodised aluminium and the piston rod as high-alloy steel with hard-chrome-plated or related hardened construction in the standard family configuration. These material choices support a combination of low weight, structural rigidity, and acceptable wear resistance for mainstream pneumatic machinery.
The low overall product weight of 295 g is also relevant in practical system design. On static fixtures, it reduces mounting burden. On moving modules, it helps limit total mass and can support better dynamic behavior. For spare-parts stocking and international trade, exact product weight is also useful when estimating packing density, carton load, and freight cost. In short, weight is not just a catalog detail; for many buyers it directly affects logistics and machine design efficiency.
Typical Application Scenarios
| Application Area | How the ADN-32-10-A-P-A Fits |
|---|---|
| Assembly Equipment | Short-stroke pressing, positioning, and part separation |
| Packaging Machinery | Gate movement, stopper action, and light pusher tasks |
| Electronics Production | Compact actuation in clean and space-limited stations |
| Fixture and Tooling Systems | Clamping assistance or motion triggering |
| Transfer Modules | Controlled linear movement over short travel |
| OEM Machine Building | Standardized compact cylinder for modular equipment |
These application examples are based on the cylinder’s type, stroke length, standard, force level, sensing capability, and environmental specification rather than on a single marketing statement from FESTO. They are reasonable engineering use cases for a compact 32 mm bore, 10 mm stroke, double-acting pneumatic cylinder of this class.
Why Buyers Choose This Model
For purchasing teams, maintenance personnel, and machine builders, the ADN-32-10-A-P-A offers several practical advantages. First, it comes from a widely recognized FESTO compact cylinder platform with standardized dimensions and documented technical data. Second, it delivers a useful combination of short stroke, moderate force, sensing compatibility, and low weight. Third, it is suitable for both new equipment projects and replacement demand where an ISO-based compact cylinder is preferred over a less standardized alternative.
In commercial terms, this is the kind of cylinder that sells not because it is exotic, but because it is usable. It fits many common machine functions, it is easy to specify, and its core parameters are clear. That usually matters more in industrial procurement than unnecessary complexity. For customers looking for a reliable FESTO compact cylinder with a 32 mm bore, 10 mm stroke, double-acting design, and official product weight of 295 g, this model is a practical and defensible choice.
Conclusion
The FESTO 536269 ADN-32-10-A-P-A is a compact ISO 21287 pneumatic cylinder built for short-stroke industrial motion. Its 32 mm piston diameter, 10 mm stroke, double-acting operation, G1/8 pneumatic connection, male-thread piston rod, sensor detection capability, and 295 g product weight make it suitable for compact automation systems where reliable linear actuation is required without wasting installation space. From assembly tools to packaging equipment and general OEM machinery, this model is a strong option when the requirement is simple: stable performance, standardized design, and practical usability in real industrial service.
