|
Schneider BMXAMO0210 Modicon X80 2-Channel Isolated Analog Output Module 0-20mA 4-20mA and ±10V
| Place of Origin | Germany |
| Brand Name | Schneider Electric |
| Model Number | BMXAMO0210 |
Product Overview
The Schneider BMXAMO0210 is a two-channel isolated high-level analog output module for the Modicon X80 automation platform. It generates standard industrial current or voltage command signals for compatible field equipment.
The module supports 0–20 mA, 4–20 mA and positive or negative 10 V output ranges. It can be used to control variable speed drives, valve positioners, actuators, current converters and other devices requiring an analog reference signal.
Each channel must be configured with the correct signal type, scaling, fallback behavior and diagnostic settings in the EcoStruxure Control Expert project.
Main Features
- Exact commercial reference: BMXAMO0210
- Modicon X80 analog output module
- Two analog output channels
- Isolated high-level output architecture
- Supports 0–20 mA output
- Supports 4–20 mA output
- Supports positive or negative 10 V output
- Suitable for drives, valves and process actuators
- Configured through EcoStruxure Control Expert
- Channel fallback and broken-wire diagnostics depend on configuration
Technical Specifications
| Model | BMXAMO0210 |
| Series | Modicon X80 |
| Product Type | Isolated Analog Output Module |
| Number of Outputs | 2 |
| Output Level | High Level |
| Isolation | Isolated output architecture |
| Current Output Range | 0–20 mA and 4–20 mA |
| Voltage Output Range | Positive or negative 10 V |
| Platform | Compatible Modicon X80 architecture |
| Engineering Software | EcoStruxure Control Expert |
| Legacy Software | Older systems may use Unity Pro |
| Fallback Configuration | Verify hold, fallback value and fault behavior |
| Load Requirements | Confirm connected-device impedance and signal type |
| Terminal Block | Confirm removable terminal block separately |
| Firmware | Verify installed revision and project compatibility |
| Supply Status | Regional availability varies; confirm before quotation |
Compatible System and Applications
The BMXAMO0210 is suitable for analog speed references, valve-position commands, actuator control, current-loop control and process-setpoint output.
The selected output range must match the receiving device. A 4–20 mA loop must be wired and configured differently from a positive or negative 10 V reference.
Before commissioning, confirm the load impedance, common wiring, shielding, fallback behavior and startup value.
Maintenance and Replacement Notes
Verify the complete BMXAMO0210 reference. BMXAMO0410 provides four isolated outputs and is not automatically interchangeable if the project expects a different channel count.
Document the rack and slot, output range, scaling, fallback value, fault response and terminal wiring before replacing the module.
After replacement, test each output with a calibrated meter or loop simulator before reconnecting critical actuators.
Related Models
Related analog output modules include BMXAMO0410 with four outputs and BMXAMO0802 with eight outputs.
BMXAMM0600 combines analog inputs and outputs and should be generated in a separate mixed-I/O batch.
Inquiry and Supply Notes
Please provide the complete module reference, CPU and rack models, slot position, output ranges, connected-load details, terminal-block requirement and firmware revision.
Product condition, output testing, terminal accessories, firmware compatibility, regional availability and delivery time must be confirmed before quotation.
Contact Us at Any Time
