|
Schneider ELAU SM-100/40/080/P0/45/S1/B0 PacDrive M 3.4kW 4000RPM High-Torque Servo Motor
| Place of Origin | Germany |
| Brand Name | Schneider Electric |
| Model Number | SM-100/40/080/P0/45/S1/B0 |
Product Overview
The Schneider ELAU SM-100/30/080/P0/44/S1/B0 is an observed commercial model from the legacy PacDrive M SM-100 servo-motor family. A row-level ELAU article number was not confirmed for this exact configuration, so replacement identification must be based on the complete motor nameplate.
The motor uses a 30/080 winding, 100 mm flange and 3 AC 400 V voltage class. It operates at 3000 RPM and has a 2.6 kW cut-off power rating, 8.2 Nm applied standstill torque and 27 Nm peak torque.
This version uses a smooth steel shaft, SinCos single-turn encoder, no holding brake and no surface ventilation. Protection code 44 corresponds to IP64 protection at both the shaft and motor housing.
Main Features
- Exact technical model: SM-100/30/080/P0/44/S1/B0
- Observed commercial model
- Article number: confirm from original nameplate
- Rated speed: 3000 RPM
- Cut-off power: 2.6 kW
- Applied standstill torque: 8.2 Nm
- Peak torque: 27 Nm
- Smooth steel shaft
- SinCos single-turn encoder
- Without holding brake
- IP64 shaft and IP64 housing
Technical Specifications
| Model | SM-100/30/080/P0/44/S1/B0 |
| ELAU Article Number | Not confirmed; verify from original nameplate |
| Coverage Status | Observed commercial model |
| Series | PacDrive M SM-100 |
| Product Type | Permanent-Magnet Synchronous Servo Motor |
| Base Winding | 30/080 |
| Flange Size | 100 mm |
| Rated Voltage | 3 AC 400 V |
| Rated Speed | 3000 RPM |
| Cut-Off Power | 2.6 kW |
| Standard Standstill Torque | 8.2 Nm |
| Surface-Ventilated Standstill Torque | 14 Nm for applicable fan-cooled versions |
| Applied Standstill Torque | 8.2 Nm |
| Peak Torque | 27 Nm |
| Applied Standstill Current | 5.48 A |
| Peak Current | 18 A |
| Shaft Configuration | Smooth steel shaft |
| Shaft Diameter | 19 mm |
| Shaft Length | 40 mm |
| Encoder | SinCos single-turn encoder |
| Holding Brake | No |
| Surface Ventilation | No |
| Protection Code | 44 |
| Protection | IP64 shaft / IP64 housing |
| Motor Length | Approximately 328 mm |
| Approximate Base Mass | 11.2 kg |
| Verification Requirement | Complete nameplate and article-number verification required |
Compatible System and Applications
The SM-100/30/080/P0/44/S1/B0 is intended for low-speed, higher-torque PacDrive M applications such as rotary axes, gearbox-driven equipment, packaging machinery, indexing mechanisms and automated material-handling systems.
Compatibility must be checked against the installed drive, controller project, winding, encoder interface, protection code and complete cable set. A confirmed article number should be obtained from the motor nameplate whenever possible.
Maintenance and Replacement Notes
This model should not be quoted as an exact article-number replacement without a clear photograph of the original nameplate. Confirm the full slash model and any separate item or serial reference.
Protection code 44 differs from code 45 because the motor housing is IP64 rather than IP65. Verify the installation environment before substituting another protection version.
Also verify shaft type, encoder, brake, surface ventilation, special option code, motor cable and feedback cable.
Related Models
Related 30/080 models include SM-100/30/080/P0/45/M1/B0, SM-100/30/080/P0/45/M1/B1, SM-100/30/080/P0/45/R1/B0 and SM-100/30/080/P0/45/S1/B1.
SM-100/30/080/P0/45/S1/B0/01 is a surface-ventilated version with a confirmed article mapping and different thermal performance.
Inquiry and Supply Notes
Please provide the complete motor nameplate, any visible ELAU article number, shaft photographs, connector photographs and installed servo-drive and cable references.
Quotation should be issued only after confirming the exact model, article number, feedback system, protection code, condition and test requirements.
Contact Us at Any Time
