|
Schneider ELAU SM-100/40/080/P0/45/S1/B1 PacDrive M 3.4kW Servo Motor SKS36 with Brake
| Place of Origin | Germany |
| Brand Name | Schneider Electric |
| Model Number | SM-100/40/080/P0/45/S1/B1 |
Product Overview
The Schneider ELAU SM-100/40/080/P0/45/S1/B1 is a brake-equipped permanent-magnet synchronous servo motor from the legacy PacDrive M SM-100 family. Its confirmed ELAU article number is 19203403V002001.
The motor uses the 40/080 winding and operates at 4000 RPM. It has a 3.4 kW cut-off power rating, 8 Nm applied standstill torque and 30 Nm peak torque.
This exact configuration combines a smooth steel shaft, SinCos single-turn encoder and an integrated holding brake. Protection code 45 provides IP64 shaft protection and IP65 housing protection.
Main Features
- Exact technical model: SM-100/40/080/P0/45/S1/B1
- ELAU article number: 19203403V002001
- Rated speed: 4000 RPM
- Cut-off power: 3.4 kW
- Applied standstill torque: 8 Nm
- Peak torque: 30 Nm
- Smooth steel shaft
- SinCos single-turn encoder
- Integrated holding brake
- Without surface ventilation
- IP64 shaft and IP65 housing
Technical Specifications
| Model | SM-100/40/080/P0/45/S1/B1 |
| ELAU Article Number | 19203403V002001 |
| Series | PacDrive M SM-100 |
| Product Type | Permanent-Magnet Synchronous Servo Motor with Holding Brake |
| Base Winding | 40/080 |
| Flange Size | 100 mm |
| Rated Voltage | 3 AC 400 V |
| Rated Speed | 4000 RPM |
| Cut-Off Power | 3.4 kW |
| Standard Standstill Torque | 8 Nm |
| Surface-Ventilated Standstill Torque | 13 Nm for applicable fan-cooled versions |
| Applied Standstill Torque | 8 Nm |
| Peak Torque | 30 Nm |
| Applied Standstill Current | 6.68 A |
| Peak Current | 25 A |
| Shaft Configuration | Smooth steel shaft |
| Shaft Diameter | 19 mm |
| Shaft Length | 40 mm |
| Encoder | SinCos single-turn encoder |
| Holding Brake | Yes |
| Brake Specification | Confirm brake torque and voltage from nameplate or motor documentation |
| Surface Ventilation | No |
| Protection Code | 45 |
| Protection | IP64 shaft / IP65 housing |
| Special Option Code | 00, standard configuration |
| Motor Length | Approximately 363 mm |
| Approximate Base Mass | 11.2 kg |
| Supply Status | Legacy product; confirm current availability |
Compatible System and Applications
The SM-100/40/080/P0/45/S1/B1 is suitable for legacy PacDrive M machine axes requiring high torque and shaft holding after motor power is removed. Typical applications include vertical axes, lifting mechanisms, gearbox-driven systems, indexing equipment, packaging machinery and automated handling systems.
The installed drive and controller must support the S1 SinCos feedback system and brake-control sequence. Confirm the brake supply, switching circuit and machine safety requirements before operation.
Maintenance and Replacement Notes
Verify the exact article number, S1 feedback and B1 brake configuration. The corresponding B0 model does not contain a holding brake and is not an automatic replacement for a vertical or gravity-loaded axis.
The brake should be used to hold a stationary axis and should not be treated as the primary dynamic stopping device. Test brake release and holding operation before returning the machine to production.
Inspect the shaft, bearings, brake wiring, power connector, feedback connector, motor cable and encoder cable. Confirm the controller project and drive parameters before commissioning.
Related Models
SM-100/40/080/P0/45/S1/B0 is the corresponding non-brake version. SM-100/40/080/P0/45/M1/B1 uses multi-turn feedback, while P1 variants use a keyed shaft.
Surface-ventilated versions using protection code 40 and option code 01 have different motor length, housing protection and continuous torque capability.
Inquiry and Supply Notes
Please provide photographs of the complete nameplate, article number, brake connector, motor connector, shaft and flange. Also provide the installed servo-drive and complete cable references.
Brake voltage, brake torque, encoder function, exact compatibility, product condition, testing status, availability and delivery time must be confirmed before quotation.
Contact Us at Any Time
