|
TOKYO KEIKI EPCG2-01-210-11 Proportional Pressure Control Valve
| Place of Origin | Japan |
| Brand Name | TOKYO KEIKI |
| Model Number | EPCG2-01-175-11 |
TOKYO KEIKI TOKIMEC EPCG2-01-210-11 Proportional Pressure Control Valve
The TOKYO KEIKI TOKIMEC EPCG2-01-210-11 is a direct-operated proportional solenoid relief valve that regulates hydraulic circuit pressure in proportion to the input current supplied to its proportional solenoid.
The 210 pressure-range code specifies a maximum adjustable pressure of 21 MPa. The valve is suitable for small-flow pressure-control circuits and for supplying pilot pressure to pilot-operated valves or variable-displacement pumps.
Electrical and Hydraulic Control
A proportional valve controller supplies regulated current to the 1 A solenoid. As input current increases, the controlled pressure rises according to the valve's current-to-pressure characteristic.
The solenoid uses two non-polarized terminals, so terminal polarity does not affect coil operation. The valve does not include an integrated electronic controller unless one is explicitly supplied as a separate accessory.
Technical Specifications
| Brand | TOKYO KEIKI / TOKIMEC |
| Model | EPCG2-01-210-11 |
| Valve Type | Direct-operated proportional solenoid relief valve |
| Pressure Range Code | 210 |
| Maximum Adjustable Pressure | 21 MPa |
| Maximum Working Pressure | 21 MPa |
| Operating Flow Range | 0.3 to 1.5 L/min |
| Rated Current | 1 A |
| Coil Resistance | 14 Ω |
| Hysteresis | Less than 3% when used with the specified controller or equivalent |
| Repeatability | Less than 1% when used with the specified controller or equivalent |
| Allowable T-Port Back Pressure | 0.2 MPa |
| Electrical Connection | DIN 43650 connector; coil terminals are non-polarized |
| Mounting Method | Gasket mounting |
| Approximate Weight | 2.5 kg |
| Design Number | 11 |
Installation and Operating Notes
- Bleed air completely from the valve before applying closed-loop or proportional control.
- Maintain control flow at or above 0.3 L/min for stable pressure regulation.
- Return the T port directly to the reservoir and limit its back pressure to 0.2 MPa.
- Use a controller designed for a 1 A proportional solenoid with approximately 14 Ω coil resistance.
- Return the manual adjustment knob counterclockwise before normal electromagnetic operation.
- Mounting bolts, the subplate and the proportional controller must be ordered separately unless included in the quotation.
Selection and Ordering Notes
The EPCG2-01-210-11 provides a higher maximum adjustable pressure than the 175 version. The two models share their basic envelope and electrical characteristics, but their pressure-control ranges are not identical.
This product is a direct-operated proportional relief valve, not a proportional reducing valve and not an ordinary on-off solenoid valve. Confirm the full model code, pressure requirement, controller compatibility and product condition before shipment.
Contact Us at Any Time
