Rexroth MS2N07-C0BQN-CSSG0-NNANN-NN MS2N Servo Motor R911346722

Rexroth MS2N07-C0BQN-CSSG0-NNANN-NN MS2N Synchronous Servo Motor

The MS2N07-C0BQN-CSSG0-NNANN-NN is an MS2N permanent magnet synchronous servo motor configuration for industrial motion-control applications and replacement enquiries. The requested material reference is R911346722. This page is organized around the complete motor designation so overseas buyers can identify the required configuration and request an individual offer. Availability, condition, identity and completeness are confirmed against the actual unit before quotation.

Complete Model and Configuration

The motor design block C0BQN identifies frame length C, rotor inertia option 0, winding BQ and cooling option N. The option block CSSG0 identifies the encoder, electrical connection, output shaft and holding brake. Keep the complete remaining suffix NNANN-NN with the enquiry. It can distinguish construction and other options that are not captured by the basic frame name.

For this motor, the configuration specifies advanced acurolink encoder; singleturn absolute, smooth shaft with sealing ring and without holding brake (code 0). Cooling is self-cooling. These identification details help compare the original machine motor with a proposed spare. They do not establish suitability for an unspecified drive, machine or operating environment. Winding design codes are not presented here as a rated or maximum speed. Exact current, torque, voltage, speed and power data must be checked for the complete configuration and cooling conditions.

Encoder and Electrical Connection

The encoder system must match the drive interface, motor cable and parameter configuration. MS2N variants can use different feedback interfaces and singleturn or multiturn absolute position detection. A matching base frame does not prove that two encoder options can be interchanged. Confirm the feedback interface, drive designation and firmware requirements using the installed system documentation.

This designation uses single-cable connection with electrical connection code S. Check the actual connector sizes, keying, orientation, cable routing and clearance against the original installation drawing. Single-cable and double-cable arrangements require their corresponding motor and feedback connections. Cables, mating plugs, adapters and any external accessories are included only when specified in the written supply scope.

Mechanical, Brake and Cooling Comparison

Compare shaft diameter and length, keyway where applicable, sealing arrangement, flange dimensions and centering diameter with the existing motor and coupling. The listed shaft option is smooth shaft with sealing ring. Do not select a motor solely because its housing or connector layout looks similar in a catalog image. An exact model match remains the starting point for a replacement assessment.

The holding-brake configuration is without holding brake (code 0). Nonzero brake sizes are distinct options and must not be treated as equal torque ratings. The correct brake torque, supply and control requirements must be established from documentation for the exact motor. A holding brake is not described here as an operating service brake. If the machine relies on axis holding when power is removed, include that requirement in the replacement enquiry.

The cooling arrangement must also match the intended duty and installation. A forced-ventilated motor requires the correct fan supply and airflow, while a water-cooled motor requires an appropriate cooling circuit. Cooling accessories and their condition must be identified for the actual offer. Ratings from another cooling version must not be transferred to this model. No particular safety approval, tested condition or drive compatibility is guaranteed by this catalog entry.

Replacement Enquiry and Material Identification

Send the full designation MS2N07-C0BQN-CSSG0-NNANN-NN, requested reference R911346722, required quantity and readable photographs of the original nameplate. Photographs of the shaft, flange, connectors and any fan or cooling connections help distinguish configurations. Include the drive type and identify whether the requirement is a maintenance spare, a failed motor replacement or a new integration.

The R911 reference is used to organize the enquiry and must be checked together with the complete type code on the actual motor. Public catalog or supplied reference information is not proof of the identity, revision or condition of a particular unit. Any genuine-part identification, inspection information, accessories, warranty terms and acceptance requirements must be agreed for the specific offer. The MS2N family is not described here as discontinued merely because a particular motor is being sourced as a spare.

Related MS2N Models

These related configurations are listed for identification and enquiry comparison. They are separate ordering types, not approved substitutes. Compare the full motor design, encoder, connection, shaft, brake and remaining suffix before considering an alternative.

Indicative Price and Commercial Terms

The displayed USD 2405.00 per piece is an indicative estimate for this configuration, calculated at 65% of an observed eBay asking price of USD 3700.00 for MS2N07-D1BNN-CSSG0-NNNNN-NN. The reference is a related motor; frame length, winding, cooling, encoder, connection, shaft, brake or other options can differ. This is not an exact-unit stock offer. The reference seller's condition, testing, warranty and availability claims do not apply to this listing. Freight, import charges and taxes are confirmed separately.

Minimum order quantity is one piece. The monthly supply target is 10 pieces, subject to actual availability. Once an in-stock unit is confirmed, dispatch is normally within one week; non-stock sourcing lead time is agreed separately. Payment is by T/T with terms confirmed in the quotation. Protective export packaging and delivery details are agreed for the actual motor. No fixed stock, official authorization, guaranteed compatibility or fixed warranty is implied.

Series Illustration and Actual Motor

Catalog motor images are series illustrations supplied for visual reference. They do not verify the exact model, material number, nameplate, shaft, connectors, cooling or brake configuration of an offered unit. Request photographs of the actual available motor and complete nameplate before approving a quotation.