Schneider ELAU VDM01D22AA00 PacDrive MC-4/11/22/400 22A 400V Single-Axis Servo Drive

Product Overview

Legacy spare-part inquiry: MC-4/11/22/400 | Reference 13130254 | Commercial identifier VDM01D22AA00. This product page supports genuine ELAU PacDrive M spare-part sourcing for installed machinery. Please match the full technical type, commercial identifier and HW/SW details to your original unit. Condition, completeness, availability and supply scope are confirmed for the actual unit offered.

The ELAU VDM01D22AA00 is a higher-power PacDrive M MC-4 single-axis servo drive corresponding to technical model MC-4/11/22/400. It operates from a three-phase 380-480 VAC supply and delivers 22 A rated continuous current with a one-second peak current of 55 A.

With a rated output of 15.2 kVA and an integrated braking circuit, this model is intended for machine axes requiring higher torque, rapid acceleration and controlled regenerative braking. The exact VDM reference, firmware and motor combination must be verified before replacement.

Main Features

• Exact commercial reference: VDM01D22AA00
• Technical model: MC-4/11/22/400
• ELAU order number: 13130254
• Rated continuous current: 22 A
• Peak current for 1 second: 55 A
• Rated output power: 15.2 kVA
• Three-phase 380-480 VAC mains supply
• Integrated 42 ohm braking resistor
• 150 W continuous braking power
• 15 kW peak braking power
• Sercos fiber-optic communication
• Automatic compatible motor recognition
• Integrated Inverter Enable input
• Temperature-controlled fan cooling

Technical Specifications

Compatible System and Applications

The VDM01D22AA00 is suitable for higher-load PacDrive M axes used in packaging machinery, cartoning systems, printing and converting equipment, robotic handling, high-inertia conveyors, rotary processing machinery and automated production equipment.

Correct sizing depends on motor continuous current, peak torque, acceleration cycle, regenerative energy and braking duty. The 22 A drive should not be selected only because its current rating exceeds that of the original unit.

Maintenance and Replacement Notes

Confirm the exact commercial reference, technical model, order number, firmware suffix and hardware revision. Back up the PacDrive controller project and record the two-digit Sercos address before removing the existing drive.

Inspect the cooling fan, DC bus terminals, braking circuit, motor terminals, protective earth, Sercos fiber-optic cables and encoder connection. Verify the motor model, feedback type, holding brake, current rating and machine duty cycle.

Because different VDM suffixes can correspond to different firmware families, replacing an AA drive with another suffix may require controller-software verification or firmware alignment.

Related Models

Confirmed related 22 A references include VDM01D22AB00, VDM01D22AD00, VDM01D22AF00, VDM01D22AG00, VDM01D22AH00, VDM01D22AK00, VDM01D22AL00, VDM01D22AP00 and VDM01D22AQ00.

Related lower-current MC-4 versions include VDM01D10AA00 and VDM01U30AA00. The higher-current family is represented by VDM01D50AA00. These models have different dimensions, current ratings, cable requirements and braking characteristics.

Inquiry and Supply Notes

Please provide the complete nameplate, firmware suffix, motor model, PacDrive controller model and photographs of the installation. Confirm whether the unit is required as a tested replacement or for repair. Product condition, fan condition, firmware, included accessories, availability and delivery time must be confirmed before quotation.

Ordering and Delivery

• Minimum order: 1 piece.
• Supply planning: 10 pieces per month, subject to actual availability.
• When an in-stock unit is confirmed, dispatch is normally within one week.
• Non-stock sourcing and delivery are agreed separately.
• Payment: T/T; other terms subject to quotation.
• Protective export packaging; packing details confirmed per unit.

The displayed price is an indicative inquiry price. Please request a quotation specifying MC-4/11/22/400, reference 13130254, required quantity, destination and delivery date. Include readable nameplate photographs and the required hardware, firmware, motor and machine-project details. Any required inspection or test evidence and the included connectors or accessories should be agreed before ordering.

Frequently Asked Questions

Can I order by the current rating alone?
Please provide the complete type code and commercial identifier. Supply class, hardware revision, firmware and machine requirements must also be checked.

Does a supplied drive include my machine settings?
Confirm the software and configuration included in the offer. Arrange your machine-project backup and commissioning resources before replacement.

Which condition and version can be supplied?
State your requirements in the inquiry. Availability, condition, completeness, price and lead time are confirmed case by case for the offered unit.