|
Schneider Electric LMC300CBC10000 PacDrive 3 LMC300 8-Axis Motion Controller with Profibus DP Module
| Place of Origin | Germany |
| Brand Name | Schneider PacDrive LMC Motion Controllers |
| Model Number | LMC300CBC10000 |
Product Overview
The Schneider Electric LMC300CBC10000 is a PacDrive 3 LMC300 motion controller supplied with a Profibus DP option module. It supports up to 8 synchronized servo axes through Sercos and combines PLC logic, motion control, machine communication and integrated I/O processing in one controller.
The Profibus DP configuration makes this version particularly relevant for the maintenance and replacement of packaging, production and material-handling machines containing legacy Profibus field devices.
Main Features
- Exact commercial reference: LMC300CBC10000
- PacDrive 3 LMC300 motion controller
- Integrated Profibus DP option module
- Maximum control capacity of 8 Sercos servo axes
- Intel Celeron M processor operating at 1.5 GHz
- 512 MB DDR2 RAM and 128 kB NVRAM
- CompactFlash card support
- 24 VDC supply and approximately 36 W power consumption
- Integrated Ethernet, CANopen, USB and serial communication
- Digital and analog I/O integrated into the controller
- Master encoder and PacNet interfaces
- IP20 cabinet installation
Technical Specifications
| Model | LMC300CBC10000 |
| Series | PacDrive 3 LMC Pro |
| Controller Designation | LMC300 |
| Variant Group | OM-P |
| Installed Option | Profibus DP option module |
| Integrated UPS | No |
| Maximum Controlled Sercos Axes | 8 |
| Processor | Intel Celeron M 1.5 GHz |
| RAM | 512 MB DDR2 |
| NVRAM | 128 kB |
| Memory Card | CompactFlash card, at least 128 MB |
| Rated Supply | 24 VDC |
| Power Consumption | Approximately 36 W |
| Digital Inputs | 20 digital inputs, 4 interrupt inputs and 16 touch-probe inputs |
| Analog Inputs | 2 inputs, ±10 V or ±20 mA, 12-bit |
| Digital Outputs | 16 outputs, maximum 250 mA each |
| Analog Outputs | 2 voltage outputs, 12-bit |
| Motion Network | 2 Sercos RJ45 interfaces |
| Fieldbus Option | Profibus DP |
| Other Communication | Ethernet, CANopen, USB, RS232 and RS422/RS485 |
| Programming Languages | ST, FBD, CFC, LD, IL and SFC |
| Real-Time Operating System | VxWorks with SEAutomation Kernel |
| Protection Rating | IP20 |
| Operating Temperature | 5–55 °C |
| Dimensions | Approximately 100 * 310 * 243 mm |
| Approximate Net Weight | 3.5 kg |
Compatible System and Applications
The LMC300CBC10000 is suitable for PacDrive 3 machines requiring up to 8 synchronized servo axes and communication with Profibus DP devices. Typical applications include packaging machines, printing lines, filling systems, conveyors, remote I/O networks, assembly machinery and equipment integrating legacy Profibus drives or instruments.
Compatibility must be confirmed by the Profibus network configuration, slave addresses, bus speed, GSD files, controller project and installed option-module hardware.
Maintenance and Replacement Notes
Before replacement, verify the complete commercial reference and confirm that the original controller contains the Profibus DP option module. Back up the CompactFlash card and controller project. Record the Profibus slave addresses, network baud rate, termination arrangement and connected device configuration before disconnecting the unit.
Verify the firmware, hardware revision, Sercos project, Ethernet settings, I/O wiring and cable set. Also confirm connected servo drives, motor matching, brake option, encoder type and shaft configuration. LMC300CAA10000 without Profibus DP is not an automatic direct replacement.
Related Models
LMC300CBL10000 combines Profibus DP and RT-Ethernet without an integrated UPS. UPS-equipped Profibus variants include LMC300CCC10000 with UPS and Profibus DP, and LMC300CCL10000 with UPS, Profibus DP and RT-Ethernet. LMC300CBB10000 provides an additional CAN option, while LMC300CBD10000 provides RT-Ethernet.
Inquiry and Supply Notes
Please provide the complete model, nameplate photographs, firmware information and details of the installed Profibus DP network. Confirm whether the original CompactFlash card, option module and connection accessories are required. Availability, hardware revision, condition and delivery time must be confirmed before quotation.
Contact Us at Any Time
