|
Schneider ATV610U75N4 Altivar 610 7.5kW Normal Duty 5.5kW Heavy Duty 380-460V Variable Speed Drive
| Place of Origin | Germany |
| Brand Name | Schneider Electric |
| Model Number | ATV610U75N4 |
Product Overview
The Schneider ATV610U75N4 is a 7.5 kW Normal Duty and 5.5 kW Heavy Duty variable speed drive from the Easy Altivar 610 series. It is designed for three-phase 380–460 VAC industrial power systems and is primarily used for pumps, fans, compressors, conveyors, water-treatment systems and building-energy applications.
This standard N4 version is supplied with a display terminal and includes embedded Modbus serial communication. The drive has an IP20 cabinet-mounted design, an integrated optimized EMC filter and an integrated DC choke.
The ATV610U75N4 supports three-phase asynchronous motors and compatible permanent-magnet synchronous motors. Final selection must be based on motor rated current, Normal Duty or Heavy Duty operation, overload requirements and the actual application load.
Main Features
- Exact commercial reference: ATV610U75N4
- Easy Altivar 610 process variable speed drive
- 7.5 kW / 10 HP Normal Duty rating
- 5.5 kW / 7.5 HP Heavy Duty rating
- Three-phase 380–460 VAC supply
- Display terminal included
- Embedded Modbus serial communication
- IP20 cabinet-mounted construction
- Integrated IEC/EN 61800-3 Category C3 EMC filter
- Integrated DC choke
- Normal Duty overload up to 110% for 60 seconds
- Heavy Duty overload up to 150% for 60 seconds
- Maximum output frequency up to 500 Hz
Technical Specifications
| Model | ATV610U75N4 |
| Series | Easy Altivar 610 |
| Product Type | Process Variable Speed Drive |
| Variant | Standard N4 Version |
| Display Terminal | Included |
| Frame Size | Frame 1 |
| Protection Rating | IP20 |
| Supply Voltage | Three-phase 380–460 VAC, -15% / +10% |
| Supply Frequency | 50/60 Hz ±5% |
| Normal Duty Power | 7.5 kW / 10 HP |
| Normal Duty Output Current | 15.8 A |
| Normal Duty Maximum Transient Current | 17.4 A |
| Normal Duty Input Current at 380 V | 14.7 A |
| Normal Duty Input Current at 460 V | 12.8 A |
| Heavy Duty Power | 5.5 kW / 7.5 HP |
| Heavy Duty Output Current | 12.7 A |
| Heavy Duty Maximum Transient Current | 19.1 A |
| Heavy Duty Input Current at 380 V | 11.3 A |
| Heavy Duty Input Current at 460 V | 10.2 A |
| Normal Duty Overload | 110% for 60 seconds or 120% for 20 seconds |
| Heavy Duty Overload | 150% for 60 seconds |
| Compatible Motor Types | Three-phase asynchronous and compatible permanent-magnet synchronous motors |
| Communication | Embedded Modbus serial |
| EMC Filter | Integrated optimized filter, IEC/EN 61800-3 Category C3 |
| DC Choke | Integrated |
| Maximum Output Frequency | Up to 500 Hz |
| Cooling | Forced convection |
| Installation | Electrical cabinet mounting |
| Dimensions | Approximately 145.25 * 298.6 * 202.7 mm |
| Reference Weight | Approximately 4.6 kg |
Compatible System and Applications
The ATV610U75N4 is suitable for variable-torque and general process applications, including centrifugal pumps, ventilation fans, small compressors, conveyors, water and wastewater systems, cooling equipment and building-energy plants.
Normal Duty is generally used for applications with moderate overload requirements. Heavy Duty should be considered for applications requiring higher starting torque or greater short-term overload capacity.
Drive selection must be checked against the motor nameplate current, operating voltage, acceleration time, load type, ambient temperature, altitude and required number of starts.
Maintenance and Replacement Notes
Verify the full ATV610U75N4 reference before replacement. ATV610U75N4Z is supplied without the display terminal and should not automatically be treated as the same delivered configuration.
Record the existing motor parameters, acceleration and deceleration settings, I/O assignments, Modbus settings, fault history and installed option modules before removing the original drive.
Inspect the cooling system, power terminals, DC-bus components, display terminal, control terminals and grounding arrangement when evaluating a used unit.
Related Models
ATV610U75N4Z is the related version supplied without the display terminal.
Adjacent standard N4 models include ATV610U55N4 at 5.5 kW Normal Duty and ATV610D11N4 at 11 kW Normal Duty.
Inquiry and Supply Notes
Please provide the complete existing drive reference, motor nameplate, motor rated current, supply voltage, application type and required Normal Duty or Heavy Duty operating mode.
Also confirm the display-terminal requirement, communication protocol, braking arrangement, installed option modules, product condition, testing scope, availability and delivery time before quotation.
Contact Us at Any Time
