Schneider ELAU SH31004P01A2000 PacDrive SH100/30100 2.48kW 3000RPM Servo Motor Smooth Shaft SKS36

Product Overview

The Schneider ELAU SH31004P01A2000 is the standard base reference for the high-torque PacDrive SH100/30100 motor platform. It corresponds to the legacy technical model SH100/30100/0/0/00/00/00/00/00 and ELAU article number 65013402V001003.

This 4-stack motor provides 2.48 kW rated power, 7.90 Nm rated torque, 10.00 Nm standstill torque and 40.50 Nm peak torque. It operates at a rated speed of 3000 RPM and supports a maximum speed of 6000 RPM.

The motor uses a smooth 24 mm steel shaft, SKS36 SinCos single-turn encoder and no holding brake. This configuration is suitable as the principal standard page for the SH100/30100 platform, while keyed-shaft, multi-turn, brake and IP67 configurations can be linked as related models.

Main Features

• Exact commercial reference: SH31004P01A2000
• Legacy model: SH100/30100/0/0/00/00/00/00/00
• ELAU article number: 65013402V001003
• PacDrive SH100 4-stack servo motor
• Rated power: 2.48 kW
• Rated speed: 3000 RPM
• Maximum speed: 6000 RPM
• Rated torque: 7.90 Nm
• Standstill torque: 10.00 Nm
• Peak torque: 40.50 Nm
• 24 mm smooth steel shaft
• SKS36 SinCos single-turn encoder
• Without holding brake
• Standard rotatable angular connector

Technical Specifications

Compatible System and Applications

The SH31004P01A2000 is suitable for PacDrive machine axes requiring high standstill torque and high short-duration peak torque. Typical applications include large packaging machines, printing and converting equipment, indexing mechanisms, rotary processing axes, material-handling equipment and automated production systems.

The smooth shaft is designed for compatible keyless couplings. Confirm the shaft fit, coupling clamping range, flange dimensions, radial load, axial load and load inertia before installation.

The servo drive must support the motor current and encoder interface. Final axis sizing should consider continuous torque, peak torque, acceleration time, regenerative loading and machine duty cycle.

Maintenance and Replacement Notes

Verify the complete SH31004P01A2000 model and do not identify the motor only as SH100/30100. Other SH100/30100 references may use a keyed shaft, SKM36 multi-turn encoder, holding brake or different protection configuration.

Confirm the smooth shaft, single-turn encoder and non-brake construction. Substituting a brake-equipped or multi-turn version may require mechanical changes, brake wiring and controller-project modifications.

Inspect the shaft, bearings, coupling, motor cable, encoder cable, connector orientation and protective earth. Confirm the installed servo drive, firmware and machine parameters before commissioning.

Related Models

Related smooth-shaft versions include SH31004P01F2100 with a holding brake and IP65 shaft protection, SH31004P02A2100 with SKM36 multi-turn feedback, and SH31004P02F2200 with multi-turn feedback, a brake and IP67 housing.

Related keyed-shaft versions include SH31004P11A2000, SH31004P11F2000, SH31004P12A2100 and SH31004P12F2100. Exact configuration matching is required.

Inquiry and Supply Notes

Please provide clear photographs of the complete nameplate, shaft, flange and connectors. Also provide the installed servo-drive model, controller information and motor and feedback cable references.

The exact commercial reference, legacy model, encoder, shaft construction, product condition, test status, availability and delivery time must be confirmed before quotation.