Schneider ELAU SH31402P01A2000 PacDrive SH140/30200 3.90kW 3000RPM Servo Motor SKS36

Product Overview

The Schneider ELAU SH31402P01A2000 is the standard base configuration for the PacDrive SH140/30200 servo-motor platform. It corresponds to the legacy technical model SH140/30200/0/0/00/00/00/00/00 and ELAU article number 65014202V001003.

This 2-stack permanent-magnet synchronous servo motor provides approximately 3.90 kW continuous power, 12.3 Nm nominal torque and 19.5 Nm continuous stall torque at a nominal speed of 3000 RPM. It uses a smooth steel shaft, SKS36 single-turn feedback and no holding brake.

The complete SH31402P01A2000 commercial reference should be used as the main website model and replacement identifier. The legacy slash-format model and article number provide additional cross-reference information for older PacDrive installations.

Main Features

• Exact commercial reference: SH31402P01A2000
• Legacy model: SH140/30200/0/0/00/00/00/00/00
• ELAU article number: 65014202V001003
• PacDrive SH140 2-stack servo motor
• Continuous power: approximately 3.90 kW
• Nominal speed: 3000 RPM
• Nominal torque: approximately 12.3 Nm
• Continuous stall torque: approximately 19.5 Nm
• Peak torque: approximately 60.1 Nm
• Smooth steel shaft
• SKS36 single-turn feedback system
• Without holding brake
• IP54 shaft and IP65 housing configuration

Technical Specifications

Compatible System and Applications

The SH31402P01A2000 is suitable for medium-to-high torque PacDrive motion axes. Typical applications include packaging machines, printing and converting equipment, rotary cutters, indexing systems, automated assembly machines, conveyors and gearbox-driven mechanisms.

The smooth shaft is designed for compatible keyless couplings. Confirm the shaft dimensions, motor flange, coupling length, load inertia and permitted radial and axial loads before installation.

The installed servo drive must be suitable for the motor current, feedback interface, required torque, acceleration profile and machine duty cycle.

Maintenance and Replacement Notes

Verify the complete SH31402P01A2000 model and article number. Do not select a replacement only from the 3.90 kW power rating or SH140 frame size.

The SH140/30200 platform includes smooth and keyed shafts, single-turn and multi-turn feedback, brake-equipped models and several environmental-protection configurations. These differences can affect mechanical fit, drive parameters and controller software.

Inspect the motor and feedback cables, connector orientation, shaft, bearings, protective earth and mechanical coupling. Confirm the servo-drive model, firmware and controller project before returning the machine to service.

Related Models

Related SH140/30200 models include keyed-shaft configurations, SKM36 multi-turn versions, holding-brake versions and models with IP65 shaft or IP67 housing protection.

High-value configurations such as SH31402P12F2100 and SH31402P12F2200 combine a keyed shaft, multi-turn feedback and a holding brake. Exact protection and connector configurations must be checked before replacement.

Inquiry and Supply Notes

Please provide the complete motor nameplate, ELAU article number, shaft photographs, connector photographs and installed cable references when requesting a quotation.

The exact model, encoder, brake, shaft type, hardware revision, product condition, testing status, availability and delivery time must be confirmed before quotation.