Schneider ELAU SH31404P02F2200 PacDrive SH140/30330 4.04kW Servo Motor SKM36 36Nm Brake IP67

Product Overview

The Schneider ELAU SH31404P02F2200 is a high-value, fully configured PacDrive SH140 servo motor corresponding to the legacy technical model SH140/30330/0/0/00/00/12/11/00 and ELAU article number 65014402V051004.

This motor belongs to the highest-torque SH140/30330 platform and provides approximately 4.04 kW continuous power, 12.9 Nm nominal torque, 33.4 Nm continuous stall torque and approximately 131.9 Nm peak torque at a nominal speed of 3000 RPM.

The SH31404P02F2200 combines a smooth steel shaft, SKM36 multi-turn feedback, an integrated 36 Nm holding brake, IP65 shaft protection and IP67 motor-housing protection. These characteristics make the complete commercial reference essential during replacement selection.

Main Features

• Exact commercial reference: SH31404P02F2200
• Legacy model: SH140/30330/0/0/00/00/12/11/00
• ELAU article number: 65014402V051004
• PacDrive SH140/30330 high-torque servo motor
• Continuous power: approximately 4.04 kW
• Nominal speed: 3000 RPM
• Nominal torque: approximately 12.9 Nm
• Continuous stall torque: approximately 33.4 Nm
• Peak torque: approximately 131.9 Nm
• Smooth steel shaft
• SKM36 multi-turn feedback system
• Integrated holding brake
• Brake holding torque: approximately 36 Nm
• IP65 shaft and IP67 housing protection

Technical Specifications

Compatible System and Applications

The SH31404P02F2200 is intended for high-torque PacDrive applications requiring multi-turn position feedback, a high-capacity holding brake and enhanced housing protection. Typical applications include vertical axes, lifting and positioning systems, large packaging equipment, rotary tables, printing machinery and gearbox-driven automation systems.

The IP67 housing provides enhanced environmental protection, but final suitability depends on the complete connector installation, shaft interface, cable sealing, operating temperature and cleaning process.

The servo drive and machine controller must support the SKM36 feedback system, brake-control requirements and the motor current and torque characteristics.

Maintenance and Replacement Notes

Verify every element of the complete SH31404P02F2200 reference. A visually similar SH140/30330 motor may use single-turn feedback, no brake, a keyed shaft or lower environmental protection.

The SKM36 multi-turn feedback configuration may contain machine-position information that must be handled correctly during replacement and commissioning. Confirm the controller project, encoder setup and reference procedure before enabling machine movement.

The 36 Nm holding brake is designed to hold a stationary axis after motor torque is removed. It must not be used as the normal dynamic stopping device. Verify brake release, brake supply, switching sequence and machine safety functions.

Inspect the shaft, bearings, brake, motor connector, encoder connector, cable seals and protective earth. Confirm the servo-drive model, firmware, complete machine project and installed cable set before operation.

Related Models

SH31404P01A2000 is the standard smooth-shaft, SKS36 single-turn and non-brake model for the SH140/30330 platform.

Related complex configurations include SH31404P12F2000 with a keyed shaft, SKM36 multi-turn feedback and holding brake. Other IP65 or IP67 configurations must be matched by the complete commercial reference.

Special-order references ending in 2009, 2300 or 2400 should not be treated as direct alternatives without full nameplate and machine-level verification.

Inquiry and Supply Notes

Please provide photographs of the complete motor nameplate, shaft, brake configuration, housing and connectors. Also provide the installed servo-drive model, controller project, motor cable and feedback cable references.

The exact model, encoder type, brake condition, protection configuration, hardware revision, product condition, testing status, availability and delivery time must be confirmed before quotation.