|
Schneider BMXAMO0410 Modicon X80 4-Channel Isolated Analog Output Module 0-20mA 4-20mA and ±10V
| Place of Origin | Germany |
| Brand Name | Schneider Electric |
| Model Number | BMXAMO0410 |
Product Overview
The Schneider BMXAMO0410 is a four-channel isolated high-level analog output module for the Modicon X80 automation platform. It provides multiple current or voltage command channels for industrial process and machine-control equipment.
The module supports 0–20 mA, 4–20 mA and positive or negative 10 V output ranges. Its four-channel format is suitable for systems controlling several variable speed drives, valves, actuators or analog setpoint devices from one rack module.
The complete hardware project, channel ranges, scaling and fallback behavior must be restored when replacing an installed BMXAMO0410.
Main Features
- Exact commercial reference: BMXAMO0410
- Modicon X80 analog output module
- Four analog output channels
- Isolated high-level output architecture
- Supports 0–20 mA output signals
- Supports 4–20 mA output signals
- Supports positive or negative 10 V output signals
- Suitable for multiple drives, valves and actuators
- Configured through EcoStruxure Control Expert
- Fallback and diagnostic functions are project-dependent
Technical Specifications
| Model | BMXAMO0410 |
| Series | Modicon X80 |
| Product Type | Isolated Analog Output Module |
| Number of Outputs | 4 |
| Output Level | High Level |
| Isolation | Isolated output architecture |
| Current Output Range | 0–20 mA and 4–20 mA |
| Voltage Output Range | Positive or negative 10 V |
| Platform | Compatible Modicon X80 architecture |
| Engineering Software | EcoStruxure Control Expert |
| Legacy Software | Older projects may use Unity Pro |
| Channel Configuration | Individual output range and scaling |
| Fallback Behavior | Confirm hold, fallback value and fault response |
| Load Requirements | Confirm receiving-device impedance and wiring |
| Terminal Block | Confirm compatible terminal block and accessories |
| Firmware | Verify module revision and project compatibility |
| Supply Status | Regional availability varies; confirm before quotation |
Compatible System and Applications
The BMXAMO0410 is suitable for process skids, water-treatment plants, HVAC systems, manufacturing lines and machines requiring multiple analog control outputs.
Typical receiving devices include variable speed drives, electro-pneumatic positioners, control valves, current converters and industrial actuators.
Each output must be checked for the correct current or voltage mode, engineering scaling, load impedance, cable shielding and safe fallback value.
Maintenance and Replacement Notes
Verify the complete BMXAMO0410 reference. BMXAMO0210 has only two outputs, while BMXAMO0802 uses a different eight-channel design.
Before replacement, record the rack and slot, all output ranges, scaling, fallback values, diagnostic configuration, wiring and firmware.
Test each channel independently after installation. Incorrect analog output values may cause unintended drive speeds, valve positions or process setpoints.
Related Models
Related analog output modules include BMXAMO0210 and BMXAMO0802.
BMXAMM0600 is a mixed analog input and output module and should not be treated as a direct replacement.
Inquiry and Supply Notes
Please provide the complete model, CPU and rack references, slot position, configured output ranges, connected-device information, terminal-block requirement and firmware revision.
Product condition, output calibration testing, terminal accessories, firmware compatibility, regional availability and delivery time must be confirmed before quotation.
Contact Us at Any Time
