|
Schneider ELAU SH30553P01F2100 PacDrive SH055/80013 0.88kW 8000RPM Servo Motor SKS36 with Brake IP65
| Place of Origin | Germany |
| Brand Name | Schneider Electric |
| Model Number | SH30553P01F2100 |
Product Overview
The Schneider ELAU SH30553P01F2100 is a higher-output PacDrive SH055 servo motor corresponding to the legacy model SH055/80013/0/0/00/00/10/01/00. It delivers 0.88 kW rated power, 1.05 Nm rated torque and an 8000 RPM rated speed.
This configuration uses a smooth cylindrical shaft, an SKS36 single-turn Hiperface encoder, an integrated holding brake and a shaft sealing ring. Its IP65/IP65 protection configuration distinguishes it from the corresponding 2000 version without the same shaft-seal arrangement.
SH30553P01F2109 is an alternate commercial reference associated with this principal configuration. The exact final reference must still be checked against the installed nameplate.
Main Features
- Exact commercial reference: SH30553P01F2100
- Alternate reference: SH30553P01F2109
- Legacy model: SH055/80013/0/0/00/00/10/01/00
- Rated power: 0.88 kW
- Rated speed: 8000 RPM
- Maximum mechanical speed: 9000 RPM
- Rated torque: 1.05 Nm
- Standstill torque: 1.20 Nm
- Peak torque: 3.50 Nm
- Smooth shaft
- SKS36 single-turn Hiperface encoder
- Integrated holding brake
- With shaft sealing ring
- IP65/IP65 protection configuration
Technical Specifications
| Model | SH30553P01F2100 |
| Alternate Reference | SH30553P01F2109 |
| Legacy Model | SH055/80013/0/0/00/00/10/01/00 |
| Series | PacDrive SH055 / Lexium SH3 055 |
| Motor Type | Permanent-magnet three-phase synchronous servo motor |
| Rated Power | 0.88 kW |
| Rated Speed | 8000 RPM |
| Maximum Mechanical Speed | 9000 RPM |
| Rated Torque | 1.05 Nm |
| Standstill Torque | 1.20 Nm |
| Peak Torque | 3.50 Nm |
| Rated Current | 1.35 Arms |
| Standstill Current | 1.70 Arms |
| Peak Current | 6.50 Arms |
| Torque Constant at 120°C | 0.70 Nm/Arms |
| Back EMF at 120°C | 41 Vrms/krpm |
| Phase-to-Phase Resistance | 10.4 ohm at 20°C |
| Phase-to-Phase Inductance | 25 mH |
| Rotor Inertia | 0.134 kg·cm² |
| Flange Size | 55 mm |
| Shaft Type | Cylindrical smooth shaft |
| Shaft Size | 9 mm diameter * 20 mm extension |
| Encoder | SKS36 single-turn, 128 sine/cosine periods, Hiperface |
| Holding Brake | Yes |
| Brake Holding Torque | 0.80 Nm at 120°C |
| Brake Supply | 24 VDC, +6% / -10%, approximately 10 W |
| Shaft Sealing Ring | Yes |
| Protection Configuration | IP65/IP65 |
| Connector | Angular 90-degree round connector |
| Cooling | Self-cooled |
| Overall Length | Approximately 203 mm |
| Approximate Net Weight | 1.88 kg |
| Thermal Time Constant | Approximately 33 minutes |
| Lifecycle | Legacy / discontinued product |
Compatible System and Applications
The SH30553P01F2100 is intended for higher-output PacDrive machine axes requiring high speed, a holding brake and sealed shaft construction. Applications include vertical positioning axes, packaging machinery, printing systems, product handling, indexing equipment and automated production machinery.
The smooth shaft requires a compatible keyless coupling. Confirm motor sizing based on continuous torque, peak torque, acceleration profile, load inertia and duty cycle.
Maintenance and Replacement Notes
Verify the exact commercial reference, alternate reference and legacy model. Confirm the single-turn encoder, smooth shaft, holding brake and shaft sealing ring.
The non-sealed SH30553P01F2000 and multi-turn SH30553P02F2100 versions are not automatic replacements. Differences in feedback and sealing may affect the controller project, homing procedure and environmental suitability.
Inspect the brake, shaft seal, connectors, cables, coupling and motor bearings. Confirm the installed servo drive, motor parameters, firmware and machine project before commissioning.
Related Models
Related 0.88 kW versions include SH30553P01F2000 without the shaft sealing ring, SH30553P02F2100 with SKM36 multi-turn feedback, SH30553P11F2000 with keyed shaft and single-turn feedback, and SH30553P12F2100 with keyed shaft, multi-turn feedback, brake and shaft seal.
SH30553P01F2109 is the alternate commercial reference associated with this configuration.
Inquiry and Supply Notes
Please provide the complete nameplate, brake and shaft-seal photographs, encoder details and cable references. Also provide the servo-drive and controller models.
Exact reference, feedback configuration, brake condition, seal condition, testing status, availability and delivery time must be confirmed before quotation.
Contact Us at Any Time
