|
Schneider ELAU SH30553P12F2100 PacDrive SH055/80013 0.88kW Servo Motor Keyed Shaft SKM36 with Brake IP65
| Place of Origin | Germany |
| Brand Name | Schneider Electric |
| Model Number | SH30553P12F2100 |
Product Overview
The Schneider ELAU SH30553P12F2100 is a fully configured PacDrive SH055 servo motor corresponding to the legacy model SH055/80013/0/1/00/00/10/11/00. It provides 0.88 kW rated power, 1.05 Nm rated torque and an 8000 RPM rated speed.
This model combines a DIN 6885-A keyed shaft, an SKM36 multi-turn Hiperface encoder, an integrated 24 VDC holding brake and a shaft sealing ring. It uses the IP65/IP65 protection configuration and is intended for applications requiring positive mechanical torque transmission, multi-turn position feedback and shaft holding when power is removed.
Main Features
- Exact commercial reference: SH30553P12F2100
- Legacy model: SH055/80013/0/1/00/00/10/11/00
- Rated power: 0.88 kW
- Rated speed: 8000 RPM
- Maximum mechanical speed: 9000 RPM
- Rated torque: 1.05 Nm
- Standstill torque: 1.20 Nm
- Peak torque: 3.50 Nm
- DIN 6885-A keyed shaft
- SKM36 multi-turn Hiperface encoder
- Integrated 24 VDC holding brake
- With shaft sealing ring
- IP65/IP65 protection configuration
Technical Specifications
| Model | SH30553P12F2100 |
| Legacy Model | SH055/80013/0/1/00/00/10/11/00 |
| Series | PacDrive SH055 / Lexium SH3 055 |
| Motor Type | Permanent-magnet three-phase synchronous servo motor |
| Rated Power | 0.88 kW |
| Rated Speed | 8000 RPM |
| Maximum Mechanical Speed | 9000 RPM |
| Rated Torque | 1.05 Nm |
| Standstill Torque | 1.20 Nm |
| Peak Torque | 3.50 Nm |
| Rated Current | 1.35 Arms |
| Standstill Current | 1.70 Arms |
| Peak Current | 6.50 Arms |
| Torque Constant at 120°C | 0.70 Nm/Arms |
| Back EMF at 120°C | 41 Vrms/krpm |
| Phase-to-Phase Resistance | 10.4 ohm at 20°C |
| Phase-to-Phase Inductance | 25 mH |
| Rotor Inertia | 0.134 kg·cm² |
| Flange Size | 55 mm |
| Shaft Type | Keyed shaft |
| Shaft Detail | DIN 6885-A, 3 * 3 * 12 mm key |
| Shaft Size | 9 mm diameter * 20 mm extension |
| Encoder | SKM36 multi-turn, 128 sine/cosine periods, Hiperface |
| Holding Brake | Yes |
| Brake Holding Torque | 0.80 Nm at 120°C |
| Brake Supply | 24 VDC, +6% / -10%, approximately 10 W |
| Shaft Sealing Ring | Yes |
| Protection Configuration | IP65/IP65 |
| Connector | Angular 90-degree round connector |
| Cooling | Self-cooled |
| Insulation Class | Class F, 155°C |
| Overall Length | Approximately 203 mm |
| Approximate Net Weight | 1.88 kg |
| Lifecycle | Legacy / discontinued product |
Compatible System and Applications
The SH30553P12F2100 is suitable for PacDrive applications requiring high-speed operation, keyed mechanical coupling, multi-turn feedback and a holding brake. Typical uses include vertical axes, gearbox-driven mechanisms, rotary indexing systems, packaging machinery, printing equipment and automated positioning systems.
The motor must be selected as part of the complete motion axis. Verify the servo drive, controller project, motor current, load inertia, acceleration cycle, brake control and encoder configuration.
Maintenance and Replacement Notes
Confirm all elements of the full model number. A motor with the same 0.88 kW rating may still have a different shaft, encoder, brake or shaft-seal configuration.
Verify that the installed machine uses an SKM36 multi-turn encoder. Replacing it with an SKS36 single-turn motor may require controller changes, encoder setup and a new reference or homing procedure.
Check the keyed coupling, key dimensions, gearbox input, shaft seal, holding brake, motor cable, feedback cable and connector orientation. The brake should be tested for correct release and holding operation before the machine returns to service.
Related Models
SH30553P12F2000 is the corresponding keyed-shaft multi-turn brake version without the shaft sealing ring. SH30553P12A2100 uses the same keyed shaft and multi-turn feedback but does not include a brake.
SH30553P11F2000 is a keyed-shaft single-turn brake version. SH30553P02F2100 uses a smooth shaft, multi-turn encoder, brake and shaft seal. SH30553P01F2100 uses a smooth shaft and single-turn feedback.
Inquiry and Supply Notes
Please provide photographs of the full nameplate, shaft and keyway, shaft seal, brake connector and encoder connector. Also provide the installed drive, controller and cable references.
The complete model, brake configuration, encoder type, shaft dimensions, seal condition, product condition, test status, availability and delivery time must be confirmed before quotation.
Contact Us at Any Time
