Schneider ELAU SH31003P01A2000 PacDrive SH100/40080 2.39kW 4000RPM Servo Motor Smooth Shaft SKS36

Product Overview

The Schneider ELAU SH31003P01A2000 is the standard non-brake configuration for the PacDrive SH100/40080 performance platform. It corresponds to the legacy technical model SH100/40080/0/0/00/00/00/00/00 and ELAU article number 65013302V001003.

This 3-stack servo motor provides 2.39 kW rated power, 5.70 Nm rated torque, 8.00 Nm standstill torque and 28.30 Nm peak torque. It operates at a rated speed of 4000 RPM and supports a maximum speed of 6000 RPM.

The motor is equipped with a smooth steel shaft, SKS36 SinCos single-turn encoder, standard angular connector and no holding brake. It provides a clear standard product page for the SH100/40080 range before adding brake, multi-turn, keyed-shaft or IP67 variants.

Main Features

• Exact commercial reference: SH31003P01A2000
• Legacy model: SH100/40080/0/0/00/00/00/00/00
• ELAU article number: 65013302V001003
• PacDrive SH100 3-stack servo motor
• Rated power: 2.39 kW
• Rated speed: 4000 RPM
• Maximum speed: 6000 RPM
• Rated torque: 5.70 Nm
• Standstill torque: 8.00 Nm
• Peak torque: 28.30 Nm
• Smooth steel shaft
• SKS36 SinCos single-turn encoder
• Without holding brake
• Standard rotatable angular connector

Technical Specifications

Compatible System and Applications

The SH31003P01A2000 is intended for PacDrive applications requiring higher continuous torque and peak acceleration than the smaller SH100 performance platforms. Typical applications include packaging equipment, printing presses, converting machinery, product-handling systems, rotary tables, cutting mechanisms and automated assembly lines.

The motor should be matched to the installed servo drive based on its 4.90 A rated current, 28.30 A peak current, torque profile and load inertia. Mechanical selection must also consider coupling alignment, shaft loading and machine duty cycle.

Maintenance and Replacement Notes

Confirm the complete SH31003P01A2000 reference, legacy slash-format model and ELAU article number. The same SH100/40080 performance platform includes brake-equipped, multi-turn, keyed-shaft and IP67 versions.

Verify the SKS36 single-turn encoder, smooth shaft, non-brake configuration and IP54 shaft protection. Do not assume that a visually similar SH31003 reference can be installed without changes.

Inspect the motor and feedback cables, connector pins, protective earth, shaft, bearings and mechanical coupling. Verify the servo-drive current capacity, feedback interface, firmware and controller project before commissioning.

Related Models

Related smooth-shaft references include SH31003P01A2100 with IP65 shaft protection, SH31003P01F2100 with a holding brake, SH31003P02A2100 with SKM36 multi-turn feedback and SH31003P02F2200 with multi-turn feedback, a brake and IP67 housing.

Related keyed-shaft versions include SH31003P11A2000, SH31003P11F2100, SH31003P12A2200 and SH31003P12F2200. These configurations differ in shaft, feedback, brake and environmental-protection characteristics.

Inquiry and Supply Notes

Please provide photographs of the full motor nameplate, shaft, flange and connectors. Also provide the installed servo-drive model, cable references and machine-duty information.

The exact model, article number, encoder, shaft type, product condition, test status, availability and delivery time must be confirmed before quotation.