|
Danfoss 060G1408 MBS3050-3831-A1FB04-4 Pressure Transmitter 0-600Bar 4-20mA G1/4
| Place of Origin | Denmark |
| Brand Name | Danfoss |
| Model Number | MBS 3050-3831-A1FB04-4 |
Product Overview
The Danfoss 060G1408 is a high-pressure MBS 3050 transmitter for demanding industrial and hydraulic systems. Its current Danfoss specification key is MBS 3050-3831-A1FB04-4.
With a measuring range of 0 to 600 bar, a standard 4–20 mA output and an integrated pulse snubber, this model is suitable for high-pressure machinery exposed to pressure peaks, cavitation or hydraulic shock.
Main Features
- Original Danfoss commercial reference: 060G1408
- Complete model: MBS 3050-3831-A1FB04-4
- High-pressure measuring range up to 600 bar
- Sealed-gauge pressure measurement
- Integrated pulse snubber
- 4–20 mA current output
- 9–32 VDC supply voltage
- G 1/4 male process connection
- Angular Pg 9 electrical connector
- IP65 enclosure rating
Technical Specifications
| Brand | Danfoss |
|---|---|
| Series | MBS 3050 |
| Commercial Reference | 060G1408 |
| Specification Key | MBS 3050-3831-A1FB04-4 |
| Pressure Range | 0–600 bar / 0–8700 psi |
| Pressure Reference | Sealed Gauge |
| Output Signal | 4–20 mA |
| Supply Voltage | 9–32 VDC |
| Pressure Connection | G 1/4 Male |
| Pressure Connection Standard | DIN 3852-G |
| Electrical Connection | Angular Connector, Pg 9 |
| Electrical Connection Standard | EN 175301-803-A |
| Pulse Snubber | Integrated |
| Enclosure Rating | IP65 |
| Typical Accuracy | ±0.5% FS |
| Maximum Overload Pressure | 900 bar |
| Autofrettage Pressure | 1600 bar |
| Medium Temperature Range | -40°C to +85°C |
| Response Time | Maximum 4 ms |
Compatible Systems and Applications
- High-pressure hydraulic power units
- Hydraulic presses and forming machinery
- Construction and mobile hydraulic equipment
- Injection-moulding and industrial machinery
- High-pressure pump monitoring
- Systems exposed to rapid pressure peaks
Maintenance and Replacement Notes
This is a 600 bar transmitter and must not be substituted with a lower-range model solely because the connector and thread appear similar. Confirm the system operating pressure, permitted overload pressure, 4–20 mA input configuration and pressure-port condition before installation.
Depressurize the hydraulic circuit completely before removing or installing the transmitter. Use the specified tightening method and avoid applying installation torque through the electrical connector body.
Related Models
- 060G1411 – MBS 3050, 0–60 bar
- 060G3875 – MBS 3050, 0–10 bar with M12 connector
- 060G1111 – MBS 3000, 0–250 bar without integrated pulse snubber
Inquiry and Supply Notes
Please quote using the commercial reference 060G1408 and the complete specification key MBS 3050-3831-A1FB04-4. Older distributor records may show a different middle code, so the nameplate and Danfoss reference should be checked before replacement.
Contact Us at Any Time
